1	Setup Message
100	Click this button to install |1 software to the specified destination directory.
101	Click this button to install |1 software to your computer.
200	Welcome to the |1 installation program.
301	Enter or select a destination directory.
302	The destination directory:
303	does not exist. Do you want the directory to be created?
304	Change Directory
400	An error occurred while calculating required disk space.
401	Cannot read drive 
402	Please verify the drive door is closed and that the disk is formatted and free of errors.
403	Could not open the file named:
407	Could not create directory: |1
411	Are you sure you want to Exit?
412	|1 Setup was interrupted before your new software was fully installed.
413	You can run |1 Setup in its entirety at a later time to complete the installation.
414	Setup is not yet complete.
415	If you quit now, this product will not be correctly installed.
416	Quit the setup of this product?
417	|1 Setup was completed successfully.
418	|1 Setup was not completed successfully.
419	Error determining allocation unit for drive 
420	is in the Setup source files directory. Please type a different directory.
423	Please insert the disk labeled:
424	'Disk 
425	' into drive 
426	Section: 
427	Invalid line in setup information file!
428	The specified directory:
429	is invalid, incomplete, or write protected. Please type a full path with drive letter; for example 'C:\APPS'.
430	The directory doesn't exist!
431	Invalid Directory Name
432	The destination file is write protected.
433	The destination file in in-use. Please ensure that all other applications are closed.
434	Out of space on destination drive |1
435	An access violation occurred while copying the file.
436	A sharing violation occurred while copying the file.
437	Out of memory trying to copy the file.
438	Cannot create temporary file.
439	Cannot delete existing destination file.
440	Cannot rename temporary file.
441	Cannot read source file.
442	Cannot read destination file attributes.
443	Internal copy error.
444	 The file could not be installed.
445	Please check the connection to drive 
446	If you ignore a copy error, the file will not be copied. The application may not function properly as a result. Do you want to ignore the error?
449	Cannot read network path '|1'.
450	Please verify that this path is correct and that you have permission to access it.
451	Application removal logfile '|1' not found. Unable to continue.
452	Invalid command-line parameters. Unable to continue.
453	Application removal executable '|1' not found. Unable to continue.
455	Error registering the application removal executable with Windows
460	Please run setup again and select a new location for application files.
462	An error occurred trying to update the Windows registration database.
463	Microsoft Shared\
465	An error occurred trying to create the program group '|1'
466	An error occurred trying to create a program icon for '|1'
467	An error occurred trying to copy '|1' to the application directory
468	The file '|1' could not be registered because it was not found.
469	Windows was unable to run the program '|1'. Your system may be low on memory, or the program may not have been found.
470	Error: 'SETUP.LST' contains no information on how to register the remote component '|1'. This information should have been found in a '|2' key in SETUP.LST
473	Cannot copy file, Destination Path is too long.
474	Cannot create Uninstall Icon, Destination Path is too long.
475	No icon was specified in SETUP.LST for |1. Do you want to continue without creating this icon? Click Yes to continue. Click No to Exit Setup.
500	Setup was unable to determine a valid default destination directory. You will need to specify a destination directory.
501	Setup is checking for necessary disk space...
502	Setup is creating program icons...
503	Setup is updating your system...
505	|1 Setup
506	The SETUP.LST file is corrupt or could not be found.
507	An unexpected setup error has occurred!
509	Setup error: Missing 'CommitAction()' or 'AbortAction()'.
510	Remote Automation Management
511	Automation Manager
512	RemAuto Connection Manager
514	Installing Data Access components...
515	Your system needs to be rebooted to update system settings.\n\nWould you like to reboot your system now?
516	Your application may not work correctly until you have rebooted your system.
600	Error determining disk space free for drive 
701	Directory:
702	&Change Directory
703	E&xit Setup
704	Begin the installation by clicking the button below.
705	Cancel
706	Destination File:
707	&Install Now
708	&Change Drive
709	Drive
710	Space Available
711	Space Needed
712	Space Required
713	There is not enough free disk space on one or more drives.
714	OK
715	Dri&ves:
716	&Directories:
717	&Path:
718	Setup cannot install system files or update shared files if they are in use. Before proceeding, we recommend that you close any applications you may be running.
719	Click here to begin setup
720	Please Shut Down All Other Applications
721	If you see any icons next to your system clock then you have other applications running. If you attempt to install this program without first shutting down these other applications this program may not install correctly.
800	|1 - Choose Program Group
801	Setup will add items to the group shown in the Program Group box. You can enter a new group name or select one from the Existing Groups list.
802	&Program Group:
803	E&xisting Groups:
804	&Continue
805	A program group name must be less than |1 characters long and cannot contain any of the following characters: |2
900	Network &Address
901	Network &Protocol
902	&Continue
903	E&xit Setup
904	Remote ActiveX Component Configuration
905	Please fill in the requested configuration information about the following remote component:
906	The protocol sequence |1 (|2) is not supported or available on this machine
907	The protocol sequence '|1' ('|2') is invalid
908	An unexpected error occurred while determining the protocol sequences available on this machine
909	Setup error: An error occurred trying to read protocols from the SETUP.LST file.
910	None of the protocols needed by this application appear to be available or installed on this machine.
911	In order to run Setup successfully, you will need to first install one of the following network protocol sequences: 
912	This application will not be able to access the remote component '|1' until the protocol '|2' is installed.
1000	Version Conflict
1001	A file being copied is not newer than the file currently on your system. It is recommended that you keep your existing file.
1002	File name:    '|1'
1003	Description:  '|1'
1004	Your version:  '|1'
1005	Do you want to keep this file?
1006	No to &All
1007	&Yes
1008	&No
2000	File currently on disk was already up to date
2001	File was not found or was an older version -- new file copied
2002	ERROR:
2003	WARNING:
2004	DURING THIS ACTION:
2005	Error writing to logfile '|1'
2006	Setup fatal error: Unable to generate installation log file.
2007	PLEASE DO NOT MODIFY OR DELETE THIS FILE!
2008	This file contains information about the installation of an application.
2009	It will be used to automatically remove all application components from your computer if you choose to do so.
2010	There was an unexpected problem trying to create or write to the logfile '|1'. Error number is |2.
2011	Out of memory trying to create or write to the logfile '|1'
2012	User Responded with '|1'
2013	Error attempting to run the application removal program to remove temporary installation files.
2014	Setup will now start the application removal utility to remove temporary installation files.
2100	OK
2101	Cancel
2102	Abort
2103	Retry
2104	Ignore
2105	Yes
2106	No
2107	(Unknown)
2200	An error occurred while registering the file '|1'
2201	Unexpected error while registering file '|1'
2202	Could not initialize OLE in order to register file '|1'
2203	LoadLibrary() failed while registering file '|1'
2204	No entrypoint for DllRegisterServer() was found in '|1'
2205	DllRegisterServer() in the file '|1' returned failure
2206	One possible cause for this error is that RPC may not be installed on your computer.
2207	If this is the problem, then you will need to exit Setup, install RPC, and restart Setup.
2208	The file '|1' was not copied because it is intended for use under Windows NT 3.51 only. It is not needed under Windows 95 or NT 4.0.
2209	\/:*?"<>|
2210	DISK
2211	Cannot find the source file '|1' to install.
2212	Could not register the TLB file '|1'.
2213	The file '|1' was not copied because it is intended for use under Windows 95 only. It is not needed under Windows NT 3.51 or 4.0.
2214	The file '|1' was not copied because it is intended for use under Windows 95 and NT 4.x only. It is not needed under Windows NT 3.51.
2215	The file '|1' was not copied because it is intended for use under Windows NT 3.51 only. It is not needed under Windows 95 or NT 4.x.
2216	Cannot update system file '|1'. You may not have permission to update system files on this machine.
10000	Do you accept all the terms of the preceding License Agreement?  If you choose No, Setup will close.  To install 
10001	, you must accept this License Agreement.
10002	Please read the following License Agreement.  Press the PAGE DOWN key to see the rest of the agreement.
10003	Software License Agreement
10004	&Yes I Agree
10005	&No I Disagree